Let me introduce an easy Valentine’s Day Wooden Crafts for everyone

Material

2 – 5/8″ x 6″ x 6’cedar fence (about $2.55 each)

Gorilla Glue

Amy Howard (Toscana) Strasbourg white milk powder

Red paint-optional

3/4″ decorative nails-optional

Waste wood (or other picket pieces)

Tools

Puzzle

Miter saw-optional

Sanding machine-optional

Drill bit and drill bit (3/8)

clamp

tape measure

Cut list

2 – 1/2″ x 5 1/2″ x 50″

2 – 1/2″ x 2 5/8″ x 10 1/2″ (or the total width of the two pickets)

The waste wood is about 9 inches long

step 1

Cut 2 cedar fences into 50 inches long. Measure the width of the two piles together (it should be about 10 1/2″ -11″). Cut the cedar picket to this length, then cut it in half wisely.

Place a 1-inch beam from both ends of the 50-inch picket, apply glue and clamp it. Note: Gorilla glue will be activated and wet the surface (water bottle or rag) to be bonded before bonding.

Step 2

Print out the LOVE template -> LOVE template. Cut out the letters and place them on the blackboard. Starting from the top, mark the letter position L on the board is 5 1/4″, the heart is 15 1/2″, V is 25 3/4″, E is 36 1/8″. Align L and E so that the straight part is on the center line where the two plates intersect.

To trace letters, I like to use a knife so that it is easy to see when cutting with a jigsaw saw.

third step

Use a jig saw or scroll saw to cut out the letters. First, punch holes in the letters so that the saw blade can pass through. The 3/8 inch drill bit is the right size. Drill as many holes as needed.

Cut out the letters. It helps to have higher quality blades.

Cut off all love. (If there are any small pieces that break like a V, stick them on)

Step 3

I painted a layer of white emulsion paint on the cedar fence and then dried it. Latex paint dries quickly and is easily troubled by sandpaper. When the paint dries, I chopped up about 9 inches of waste wood. For each letter, you need at least 8 3/4 inches of scrap, if necessary, paint on the scrap.

Turn the “love” card over, and glue the broken wood glue to the back of the card.

I initially painted some scraps pink and some red.

I’m not sure if this is my favorite, so I painted pink with red. How will you draw the sign?

Either way, I like it!

We also have some interesting wooden crafts for sale,Let’s share next time.